Hi, welcome to MPS Electrical Ltd Thermal Image Electrical Surveys Leeds page.
We are 18th edition City & Guild Electrical Approved. We are domestic, commercial & industrial electrical contractors in Leeds.
We specialise in Electrical Inspection & Testing. We conduct Thermographic Imaging Electrical Surveys on any property for peace of mind. This is for routine maintenance or to satisfy insurance companies. We make sure no electrical issues are obvious.
We conduct electrical Thermal Image Electrical Surveys Leeds, Bradford, Wakefield, York & Harrogate. We stretch further a field for our commercial customers and work nationwide if needed.
Thermal Imaging
Using thermal imaging, our electricians can accurately find existing faults with an electrical installation. They can also predict potential future issues. This ability will save lives and stop the property from catching fire.
Thermal Imaging Leeds
Thermal Image Electrical Surveys Leeds detects electrical anomalies that are often invisible to the naked eye. It identifies issues on electrical installations, including burning loose electrical connections inside mains consumer units. This applies to both single-phase and three-phase systems. Thermal Image Electrical Surveys Leeds identifies these issues. This allows corrective actions to be taken. These measures are taken before catastrophic costly system failures occur.
Electrical Thermal Imaging Reports or Thermal Image Electrical Surveys Leeds reports is a process. It uses a special camera designed to look only for heat. This is done by capturing infra red (IR) energy waves. Excess heat released by an electrical system can show potential problems. This applies even to systems that normally produce some heat when performing at their best level.
If Electrical heat build up issues within electrical installations stay undetected, these problems can lead to failure. They can also result in an electrical fire. This almost certainly means an expensive production loss or downtime. In the most extreme case, it can lead to an electrical fire.
A regular inspection of thermal imaging as part of reactive routine maintenance can highlight potential problems long before any event.As a result any required electrical replacements or repairs can be planned for in terms of both time and budgets.
In short, it is an invaluable resource for predictive maintenance. Thermal Image Electrical Surveys Leeds has applications in many different areas which are listed below.
Thermal Image Electrical Surveys Leeds can detect the next in electrical systems in Leeds before they cause a problem:
- Loose connections
- Overloads
- Phase imbalances
- Corrosion
- High resistance in fuses and switch gear
Thermal Image Electrical Surveys Leeds can detect the following in mechanical systems in Leeds:
- Motor overload
- Worn Bearings
- Boiler seal leakage
- Insulation breakdown
- Hydraulic, steam and hot water systems
- Tank levels and insulation
- Valves
- Turbines
Thermal Image Electrical Surveys Leeds can detect the following in buildings in Leeds:
- Continuity of insulation
- Flat roof leakage
- Heating, ventilation and air conditioning
- Cold storage thermal gain
- Seals
Electrical Inspection And Thermographic Testing Testing in Leeds
Why do I need to carry out an Thermal Image Electrical Surveys Leeds
The Electricity at Work Regulations of 1989 requests a “duty of care” on landlords and employers. They must keep electrical systems to prevent danger. Thermal imaging is a widely used method. It can find problems that the naked eye can’t. Additionally, it is non-invasive or intrusive. Thermal imaging can detect potential problems within the electrical distribution system without the need to isolate circuits. Images can be taken of key components captured in a thermal image and a digital image. Thermal imaging lets you carry out live testing whilst meeting your obligations under legislation.
Who should do the work?
This type of work must be carried out by a qualified electrician. The electrician must be experienced in 18th edition standards and qualified to City & Guilds.
All of our Electricians are fully qualified electricians who have experience of test and inspection.
What is Thermal Image Electrical Surveys Leeds all about?
Thermographic inspection of electrical infrastructure using infrared cameras in Leeds that show temperatures. This is known as Thermal Image Electrical Surveys Leeds or radiometric thermal imaging. It is applied to open switch gear, electrical panels, distribution boards, switches, tap offs, bus bars, and other electrical items. Our inspections use Load Correction electrical formula that helps to assess electrical components. These formula offer:
- Load Corrected temperature which estimates temperature based on top load
- Fault severity taken from differential between Load Corr and British Standard cable Reference temp set at 75C (65-85C)
- Highest amps that can be safely run without exceeding the BS Reference temperature set at 75C (65-85C)
Incentive to inspect Leeds Properties?
A trained professional can produce a detailed report. This will help show that reasonable steps have been taken. These steps confirm your electrical infrastructure is of reasonable integrity. Additionally, it will satisfy your insurance company requirements for the fire prevention in electrical systems related scenarios.
Our other sites
Electrical Inspecting & Testing Leeds
